Table of Contents
Advertisement
9.6.8
Edit Banner Message
The banner is the message that displays on the panel LCD when the system is normal, that is,
when no alarms or troubles exist and no one is currently using system menus. You can create a
customized message, which can be up to 40 characters, two lines of 20 characters each.
If you do not create a customized message, the system will use the internal banner. You cannot
change the internal banner.
To customizing the banner display message:
1. Enter the installer code. The panel will automatically go to the main menu.
2. Select
for Panel Programming.
7
Display reads:
3. Select
for System Options.
5
4. Select
for Edit Banner. A screen similar to the one shown in Figure 9-13 will display
7
5. Select each letter by pressing the
acter.
6. When done, press
151430
Initializing
Please wait . . .
Figure 9-13 Internal Banner Message
or
arrow, then press
to save the custom banner.
firealarmresources.com
Programming
to move to the next char-
9-35
Advertisement
Table of Contents
Troubleshooting
