Network Repeater Installation - Honeywell SILENT KNIGHT RPS-2000 Installation And Operation Manual

IFP-2000 Installation Manual
5.4.2

Network Repeater Installation

The network repeater mounts in its own cabinet. The cabinet must be placed within 2 feet of
the main control panel cabinet in order for the 5 foot ribbon cable to reach between the
repeater and the control panel.
Use the following steps to properly mount the network repeater to the IFP-2000.
1. Place the network repeater cabinet within 2' of the IFP-2000 panel. Use 3/4"or larger
conduit between the IFP-2000 and the repeater cabinet. Install the repeater PCB in the
repeater cabinet using the mounting hardware provided.
5-6
Figure 5-5 Network Repeater mounted in cabinet
firealarmresources.com
151430