IFP-2000 Installation Manual
4.11 Vip Module Installation
For Installation of the VIP-50, VIP-VCM and VIP-RM2000 modules refer to the VIP-Series
Installation manual P/N 151286.
Note: When using these modules on a network of panels, the VBUS must not span panels. A VBUS can only be
connected between modules on the same panel.
4.12 Telephone Connection
Connect the telephone lines as shown in Figure 4-31. The Model 7860 phone cord is available
from Silent Knight for this purpose.
If you do not use the model 7860 to connect to the phone lines, the wire used for the
connection must be 26 AWG or larger diameter wire.
A number of programmable options are available for customizing telephone lines. These
options are described in Section 9.6.2.
4-30
Figure 4-31 Connection of Telephone Lines
firealarmresources.com
151430