Network System Hardware Features; Software Features - Honeywell SILENT KNIGHT RPS-2000 Installation And Operation Manual

IFP-2000 Installation Manual
• Supports conventional 2-wire & 4-wire detectors using the 8 Flexput™ circuits or SLC
zone modules.
• 999 software zones, 999 output groups.
• Add 4 notification/auxiliary power circuits with each 5496 Intelligent Power Module.
• Add 6 Flexput™ circuits with each RPS-1000 Remote Power Supply.
• Interconnection capability for up to 8 panels.
1.1.2

Network System Hardware Features

• Up to 8 IFP-2000 panels can be connected within a networked system providing a
maximum addressable point capacity of 5,088.
• The networked system can be configured to emulate a large virtual system or can be
segmented into separate sites for multiple building applications.
• Each building is referred to as a "site". All panels in a site operate as a single panel.
• Panels can be interconnected using a BUS or CLASS A (style 7) topology.
• Panels can be connected cost effectively via shielded twisted pair copper wire within
conduit when the panels are located no more than 20 feet apart and within the same room.
• Panels separated by more than 20 feet or located in multiple buildings use IFP-RPT
network repeater hardware to provide up to 3000 ft. of separation with twisted pair copper
wire or up to 8dB loss of signal separation for fiber optic cable. All 3 methods of panel
connectivity can be used within the same networked system.
• The network architecture provides true peer to peer capability allowing network
survivability for all hardware that remains operational in the event of partial system
failure.
1.1.3

Software Features

• Advanced analog smoke detector features:
Three sensitivity settings (high, medium, low)
Automatic drift compensation
Maintenance alert region
Point status eliminates calibrated smoke test requirements for NFPA 72
Automatic day/night sensitivity adjustment
• "JumpStart AutoProgramming" feature for easy programming
• Non-volatile event history stores 1000 events per panel
• A choice of output patterns available for notification outputs, including ANSI 3.41
temporal signal
• Built-in synchronization appliance support for AMSECO, Gentex
®
Wheelock .
1-2
firealarmresources.com
® ®
, System Sensor , and
151430