Both Ports Used; Miscellaneous Options 3; Alarm Verification Time - Honeywell SILENT KNIGHT RPS-2000 Installation And Operation Manual

9.6.6.4 Both Ports Used

When the Both Ports Used option is set to Y (Yes) the IFP-RPT Repeater will supervise the
network wiring on both repeater ports.
11. Press the or
12. Then press or
9.6.7

Miscellaneous Options 3

From Miscellaneous Options 3, you set the alarm verification time, and set the start and end
week and month of Daylight Saving Time.
To edit Miscellaneous Options 3:
1. Enter the installer code. The panel will automatically go to the main menu.
2. Select for Panel Programming.
7
3. Enter code if prompted.
Display reads:
4. Select for System Options.
5
5. Select for Miscellaneous Options 3.
6

9.6.7.1 Alarm Verification Time

You can set the alarm verification time from 1 to 250 seconds (default is 60 seconds).
To set the alarm verification:
6. Enter the desired number of seconds for the alarm verification time.
7. Press
or
151430
arrow to toggle this selection between Y (Yes) or N (No).
. to make your selection and move to the next programming option.
Initializing
Please wait . . .
to make your selection and move to the next programming option.
firealarmresources.com
Programming
9-33