Modules; Edit Modules; Naming Modules - Honeywell SILENT KNIGHT RPS-2000 Installation And Operation Manual

IFP-2000 Installation Manual
9.2

Modules

This section lists the options available under the module option in the Panel Programming.
The following modules are available for the control panel: 5824 serial/parallel printer
interface module, RA-2000 remote fire alarm annunciator, 5815XL SLC expander, RPS-1000
intelligent power module, 5496 intelligent power module, 5880 LED I/O module, 5865 LED
annunciator, VIP-50 50 watt audio amplifier, VIP-VCM voice control module, and VIP-
RM2000 remote microphone.
9.2.1

Edit Modules

The features that can be edited when this option is selected are module ID, module name,
class of wiring (Class A or Class B), or features that are specific to the module to be edited.
To edit an existing module:
1. Enter the installer code. The panel will automatically go to the main menu.
2. Select for Panel Programming.
7
Note: If you are working on a networked system you will need to select which panel you want to program
Display reads:
3. Press enter to select SLC family IDP
4. Press to enter module menu.
1
5. Press to edit a module.
1
6. Use the or

9.2.1.1 Naming Modules

You can assign an English name to a system hardware module to make it easier to recognize
on a display.
7. If you wish to edit the modules name press the
the modules, name (or press
9-2
Initializing
Please wait . . .
arrow to select the module you wish to edit.
to bypass name edit).
firealarmresources.com
or arrow to select each character for
151430