Setting The Vitals Collection Notification Volume - Honeywell Genesis Touch User Manual

Configuring Monitors for Patients
2. Select Scale Type. A window similar to the following appears:.
3. Select the type of scale you are assigning to this monitor. The window disappears and the previous
screen appears with the scale type you selected listed under the Scale Type option.
Note: For the A&D scale, units are displayed according to the switch setting on the bottom of the
scale. Verify that the switch is set to the units (lbs or kg) required before deploying to a
patient.
4. Press the return key (
Setting the Vitals Collection Notification Volume
The Genesis Touch allows you to set the volume for the spoken vital collection notification.
This section assumes that you are at the General Settings screen. Refer to Getting to the General Settings
Screen for more information.
To set the volume for vitals collection notification:
1. From the General Setting screen, select Device. A screen similar to the following appears:
3 - 18
) to return to the General Settings screen.
© 2014 Honeywell HomMed. All rights reserved. P4820EN.04 4/16/14