Table of Contents
Advertisement
Configuring Monitors for Patients
2. Select the check box next to Allow exit during vital signs collection. A screen similar to the following
appears with a check mark in the box to indicate that allow exit during vital signs collection is enabled:
3. Press the return key (
) to return to the General Settings screen.
Downloading Firmware Upgrades
Periodically, firmware upgrades will be available for Genesis Touch monitors. Customers will be advised
as to when upgrades are available for download.
This section assumes that you are at the General Settings screen. Refer to Getting to the General Settings
Screen for more information. The password you will need is: 4237.
To initiate a firmware download:
1. From the General Setting screen, select Download. A screen similar to the following appears:
3 - 20
© 2014 Honeywell HomMed. All rights reserved.
P4820EN.04
4/16/14
Advertisement
Table of Contents
