Table of Contents
Advertisement
3. Place your finger on the light bulb icon (
want.
4. To set the volume of the monitor, place your finger on the speaker icon (
right to get the volume you want.
5. Press back to return to the Settings screen.
Setting General Features
Topics accessible from the General option include:
•
Scheduling vital signs acquisition
•
Setting up questions
•
Setting up peripherals
•
Setting up reminders
•
Communicating with LifeStream
•
Setting date and time
•
Enabling device capabilities
•
Downloading firmware
All of these settings are accessed through the General Settings screen.
The Genesis Touch can be configured for patient use from LifeStream (recommended) as well as from the
monitor. If you configure monitor directly at the monitor, you will always be asked if you want to sync the
configuration with LifeStream. If you answer Yes to this question, the configuration done at the monitor
will override the monitor configuration provided by or pending from LifeStream. If you do not want the
configuration from the monitor to override the LifeStream configuration, you must answer No to this
question.
4/16/14
P4820EN.04
) and slide it to the left or right to get the brightness you
© 2014 Honeywell HomMed. All rights reserved.
Setting General Features
) and slide it to the left or
3 - 3
Advertisement
Table of Contents
