Sending Test Vital Signs - Honeywell Genesis Touch User Manual

Setting General Features
Sending Test Vital Signs
Once you've set up your transmit options, send a test vital signs packet to verify that your monitor is
transmitting properly. This test message shows up as an empty packet in LifeStream and confirms
communications.
This section assumes that you are at the General Settings screen. Refer to Getting to the General Settings
Screen for more information.
To send a test message:
1. From the General Setting screen, select LifeStream. The LifeStream screen appears:
2. Select Send Test Vitals. Messages similar to the following appear in the window telling you the status
of communications:
4/16/14 P4820EN.04 © 2014 Honeywell HomMed. All rights reserved. 3 - 25