Configuring Monitors for Patients
Verifying Communication
This section assumes that you are at the General Settings screen. Refer to Getting to the General Settings
Screen for more information. The password you will need is: 4237.
To verify that communications with LifeStream are enabled and available:
1. From the General Setting screen, select LifeStream. The LifeStream screen appears:
2. Select Check Communications. Messages similar to the following appear in the window telling you
the status of communications:
A screen similar to the following appears indicating that the monitor and Lifestream are communicating:
3 - 22
© 2014 Honeywell HomMed. All rights reserved.
P4820EN.04
4/16/14