Communicating With Lifestream - Honeywell Genesis Touch User Manual

Hide thumbs Also See for Genesis Touch:

Table of Contents

2. Select Download. Since there are currently no updates for the monitor, a screen similar to the

following appears:

Note:

Detailed instructions will be provided when an update is needed on your Genesis Touch.

Communicating With LifeStream

This screen allows you to:

•

Verify that communication is available

•

Retrieve a configuration for a particular patient from LifeStream

•

Upload the configuration you programmed at the monitor to LifeStream.

•

Send a vital signs test packet to LifeStream

IMPORTANT: The Genesis Touch can be configured for patient use from LifeStream (recommended) as

well as from the monitor. If you make configuration changes at the monitor, you will be

asked if you want to sync the configuration with LifeStream. If you answer Yes to this

question, the updated configuration will be sent to LifeStream immediately. If you

answer No, the updated configuration will be sent to LifeStream along with the next

vitals packet. In either case, the updated configuration will override the configuration

originally provided by, or pending from, LifeStream

If you made configurations changes at the monitor and do not want the configuration

from the monitor to override the LifeStream configuration, you must answer No to this

question, send a new configuration from LifeStream, and retrieve that configuration by

selecting Retrieve Configuration on the monitor's LifeStream screen. This will cause the

configuration downloaded from LifeStream to override the configuration changes you

made at the monitor.

4/16/14

P4820EN.04

Setting General Features

3 - 21

Table of Contents

Hommed genesis touch