Introducing Dsl Router Commander; Logging In - Digicom Michelangelo LAN Manual

Chapter...
DSL Router Commander is a user-friendly interface that allows you to initialize, view and
modify your router configurations to match the characteristics of your network environment.
1 . 1

Logging In

1. Place the ADSL CD-ROM into your CD-ROM Drive. You will be prompted with a
Menu, followed by a prompt asking you to install Acrobat Reader for viewing the
manuals. Click OK.
On the Main Menu, select
(If you do not see the Main Menu displayed, you may run the menu.exe file from the ADSL CD-
ROM. You may also run DSL Router Commander by running DslCom.exe file from \Tools\DSL
Router Commander folder on the CD-ROM.)
2. You will be prompted for your log in password. Enter the password as
default) and click OK.
1
Introducing DSL
Router Commander
RUN DSL ROUTER COMMANDER.
(The factory default for
is 192.168.1.1 and password respectively*.
Password
Replace them with your new Router IP Address
and Password if your System Administrator has
changed them. (* "stm" for old models))
Main
stm (factory's
Router IP Address and
5