Software Manual
3 . 2
Route Table
Route Table allows you to set, view or delete a static route or deletes all routes. Check with
your System Administrator for details.
i)
Click the
Route Table
To
add
a static IP route, enter all the required information and click Add.
•
Label
•
Dest IP
•
Next Hop
•
Netmask
2 8
tab.
Enter any name for your static route.
Enter the IP Address of the network destination.
Enter the IP address of the router or gateway to which
packets destined for network destination [Dest IP] should be
sent.
Enter the address to indicate network mask of network
destination. (Default is ff.ff.ff.00. For example, 0.0.0.0 is
the default route that will be used if none of the specific
routes defined matches the destination IP.)