Configuring For Rfc 2684 (Rfc 1483) Bridged - Digicom Michelangelo LAN Manual
Router commander
Hide thumbs
Also See for Michelangelo LAN:
- User manual (41 pages) ,
- Quick manual (2 pages) ,
- User manual (21 pages)
Table of Contents
Advertisement
Software Manual
3 . 1 . 1
Configuring for RFC 2684 (RFC 1483) Bridged
i)
Select
Line Configuration
ii)
In the
PVC
section, enter the
iii)
In the
IP Address
section, enter all the required IP addresses assigned to you by your
ISP / System Administrator.
(Depending on your ISP, you may select the option
The
WAN IP
Configuration,
grayed out. The addresses will be allocated by your ISP Server automatically.)
iv)
Select the
NAT
option as determined by your System Administrator. If required, click
Inbound
and fill in the data. (See
v)
Select the
Framing Mode
1 4
tab. In the
Protocol
section, click
VPI
and
VCI
values assigned by your ISP.
Obtain Wan Setting
WAN Subnet Mask
and
section 3.1.1a - NAT
option as determined by your ISP.
RFC 1483
Bridged.
Automatically.
Remote Gateway
fields will be
Inbound)
Advertisement
Table of Contents
