Configuring The Pcs - Digicom Michelangelo LAN Manual

1. For configuration without NAT:
The range of the IP address used in this example is from 202.166.30.1 to
202.166.30.6 as restricted by subnet mask defined.
Network ID : 202.166.30.0
The ISP will have to create a static route:
Network ID : 202.166.30.0
Next Hop Gateway : 202.166.29.154
2. For PPPoA and PPPoE:
The WAN IP and WAN Gateway will be dynamically assigned by the PPP
server. There is no need to specify the WAN IP nor to configure a default
route to the WAN Gateway.
2 . 1

Configuring the PCs

For PC A:
(with NAT)
IP = 192.168.1.11
Subnet mask = 255.255.255.0
Gateway = 192.168.1.1
For PC B:
(with NAT)
IP = 192.168.1.12
Subnet mask = 255.255.255.0
Gateway = 192.168.1.1
For PC X:
(with NAT)
IP = 192.168.1.23
Subnet mask = 255.255.255.0
Gateway = 192.168.1.1
Broadcast ID : 202.166.30.7
Subnet Mask : ff:ff:ff:f8
(without NAT)
= 202.166.30.2
= 255.255.255.248
= 202.166.30.1
(without NAT)
= 202.166.30.3
= 255.255.255.248
= 202.166.30.1
(without NAT)
= 202.166.30.6
= 255.255.255.248
= 202.166.30.1
Software Manual
9