Digicom Michelangelo LAN Manual page 17

For Multiple PVCs:
vi) For multiple PVCs, click
- In the Protocol
- In the IP Address
Mask addresses assigned to you by your ISP / System Administrator.
(The WAN IP Configuration must be a unique IP address for different set of PVC
values.)
Depending on your ISP, you may select the option
Automatically. The addresses will be allocated by your ISP Server automatically.
- In the PVC
- Select the Framing Mode
- Click Add. A protocol with the new PVC values will be listed.
(To remove a PVC value, click on the respective protocol and click Remove.)
- Click Apply
see a dialog box,
vii) Click Apply for changes to take effect. Upon configuration successful, you will see a
dialog box, 'Configuration
viii) Click Close to save the configurations and exit.
Multiple PVC.
section, select RFC 1483
section, enter the WAN IP Configuration
field, enter the new VPI and VCI values.
option as determined by your ISP.
for changes to take effect. Upon configuration successful, you will
'Configuration Successful' prompted. Click OK.
Successful' prompted. Click OK.
Software Manual
Bridged.
and WAN Subnet
Obtain Wan Setting
1 7