Configuring For Transparent Bridge - Digicom Michelangelo LAN Manual
Router commander
Hide thumbs
Also See for Michelangelo LAN:
- User manual (41 pages) ,
- Quick manual (2 pages) ,
- User manual (21 pages)
Table of Contents
Advertisement
3 . 1 . 6
Configuring for Transparent Bridge
i)
Select
Line Configuration
ii)
In the
PVC
section, enter the
iii)
Select the
Framing Mode
iv)
Click
Apply
for changes to take effect. Upon configuration successful, you will see a
dialog box,
'Configuration
v)
Click
Close
to save the configurations and exit.
To change the LAN IP address / LAN Subnet Mask at the
/
LAN Subnet Mask
tab. In the
Protocol
field, click
VPI
and
VCI
values assigned by your ISP.
option as determined by your ISP.
Successful' prompted. Click OK.
field, read the Note on page 15.
Software Manual
Transparent
Bridge.
LAN IP Configuration
2 7
Advertisement
Table of Contents
