Configuring For Rfc 2684 (Rfc 1483) Routed - Digicom Michelangelo LAN Manual
Router commander
Hide thumbs
Also See for Michelangelo LAN:
- User manual (41 pages) ,
- Quick manual (2 pages) ,
- User manual (21 pages)
Table of Contents
Advertisement
Software Manual
3 . 1 . 2
Configuring for RFC 2684 (RFC 1483) Routed
i)
Select
Line Configuration
ii)
In the
PVC
section, enter the
iii)
In the
IP Address
section, enter all the required IP addresses assigned to you by your
ISP / System Administrator.
iv)
Select the
NAT
option as determined by your System Administrator. If required, click
Inbound
and fill in the data. (See
v)
Select the
Framing Mode
To change the LAN IP address / LAN Subnet Mask at the
/
LAN Subnet Mask
2 0
tab. In the
Protocol
section, click
VPI
and
VCI
values assigned by your ISP.
section 3.1.1a - NAT
option as determined by your ISP.
field, read the Note on page 15.
RFC 1483
Routed.
Inbound)
LAN IP Configuration
Advertisement
Table of Contents
