Configuring Your Ethernet Card For Dhcp - Digicom Michelangelo LAN Manual

Software Manual
3 . 3 . 1

Configuring Your Ethernet card for DHCP

i) From your Windows desktop, right-click on
ii) From the Configuration
in PnP mode.
(3Com EtherLink III ISA Ethernet Card is used as an example here. Please select the TCP/IP
protocol that is binded to your Network Card connecting to your router).
Click Properties.
3 2
Network
tab, select TCP/IP-> 3Com EtherLink III ISA [3C509b-TPO]
(If you do not see a TCP/IP networking
protocol, re-install your Ethernet card.)
Neighborhood. Select Properties.
iii) Click the option 'Obtain
an IP address
automatically' and click
OK to save the settings.
When prompted to
restart, click Yes.