Snmp - Digicom Michelangelo LAN Manual

3 . 4

SNMP

SNMP - Simple Network Management Protocol, is used to communicate management
information (MIB or Management Information Base) between the network management
stations (e.g a management software running in your PC) and the agents in the network
elements (e.g your router).
SNMP "communities" (used in this case like passwords) can be set with the following table.
Any number of community strings can be set up, each of which can be set to allow either
read-write or read-only access. It also can be usable either from any IP address or only
from a configured management IP address (authorized IP).
i) Click the SNMP tab.
To add an access right or read, enter the required information and click Add.
• SNMP Access Right (Write)
• SNMP Access Right (Read)
Software Manual
To have read and write access to SNMP
MIB of your router.
To have read access only, to SNMP MIB
of your router.
3 3