Table of Contents
Advertisement
3G Industrial Router VPN Pro
2.3. rEsEt Button
FuNCtioN
Reboot
Restore to factory default setting
2.4. EthErnEt Port
The Ethernet port has two LED indicators (please check the following picture). The yellow one is Speed indicator and the green
one is link indicator. There are three status of each indicator. Please refer to the form below.
iNDiCator
Speed Indicator
Link Indicator
2.5. mountIng thE routEr
Mount the router on a DIN rail with 3 M3 screws.
2.6. InstaLL thE sIm carD
inserting Sim Card
1. Make sure power supply is disconnected.
2. Use a screwdriver to unscrew the screw on the cover, and then remove the cover, you could find the SIM Card slots.
3. Insert the SIM card, and you need press the card with your fingers until you hear "a cracking sound". Then use a screwdriver
to screw the cover.
2.2
oPeratioN
Push the button for 5 seconds under working status
Push the button for 60 seconds once you power on the router until all the three LEDs at the
left side (RUN, PPP, USR) blink at the same time for 5 times
StatuS
DeSCriPtioN
Off
10 Mbps mode
On
100 Mbps mode
Off
Connection is down
On
Connection is up
Blink
Data is being transmitted
Installation
Advertisement
Table of Contents
