Line Configuration - Digicom Michelangelo LAN Manual

Software Manual
The following describes the menu items:

Line Configuration

(see section 3.1 for details)
To select the desired protocol and configure the IP addresses/Subnet Mask that is required
for your network. You may set, modify or view the settings for your configuration.
Route Table
(see section 3.2 for details)
To set, view or delete static route(s).
DHCP
(see section 3.3 for details)
To add, modify or view the DHCP server for your local network.
(DHCP allows centralized configuration of all workstations' TCP/IP protocol and IP address
allocation from the server.)
SNMP
(see section 3.4 for details)
To manage the list of SNMP community names.
DSL Monitoring Application
(see section 3.5 for details)
To monitor the activities of your router from the computer connected to it. Click Close to
exit DSL Router Commander.
1 2