Configuring For Rfc 2364 - Digicom Michelangelo LAN Manual
Router commander
Hide thumbs
Also See for Michelangelo LAN:
- User manual (41 pages) ,
- Quick manual (2 pages) ,
- User manual (21 pages)
Table of Contents
Advertisement
Software Manual
3 . 1 . 5
Configuring for RFC 2364
i)
Select
Line Configuration
ii)
In the
PVC
section, enter the
iii)
Select the
NAT
option as determined by your System Administrator. If required, click
Inbound
and fill in the data. (See
iv)
Select the
Framing Mode
v)
Select the
PPP Authorization
vi)
Enter your
User Name
vii)
Click
Apply
for changes to take effect. Upon configuration successful, you will see a
dialog box,
'Configuration
To change the LAN IP address / LAN Subnet Mask at the
/
LAN Subnet Mask
2 4
tab. Click
RFC
2364, depending on your ISP.
VPI
and
VCI
values assigned by your ISP.
section 3.1.1a - NAT
option as determined by your ISP.
as determined by your ISP. Default is Auto.
and
Password
as given by your ISP.
Successful' prompted. Click OK.
field, read the Note on page 15.
Inbound)
LAN IP Configuration
Advertisement
Table of Contents
