Digicom Michelangelo LAN Manual page 16

Software Manual
c) From the IP Address
the existing IP Address
Mask to the same subnet as the
LAN IP / Subnet Mask you have
entered at the DSL Router
Click OK and restart you system if
You can now run the DSL Router
Commander with the new IP
If you have set the subnet mask of the LAN IP to 255:255:255:255, you will
not be able to run DSL Router Commander. This is because only one IP is
allowed on the LAN network and it is already allocated to the router.
1 6
tab, overwrite
/ Subnet
Commander.
prompted.
address.