Getting Ready Information Required - Digicom Michelangelo LAN Manual

Software Manual
You may also change your login password by selecting the
the DSL Router Commander.
1 . 2

Getting Ready Information Required

To configure your router, you need to have the following information ready from your
Internet Service Provider (ISP) and System Administrator.
The following table shows the information required.
a ) Check with your ISP:
i) The line protocol to use
ii) For RFC 2684 (RFC 1483) / RFC 2225 (RFC 1577):
The addresses for
For RFC 2516 / RFC 2364:
The PPP Authorization's
iii) The Framing Mode
6
WAN IP
WAN Subnet Mask
VPI and VCI values
Default WAN Gateway
DNS Relay
DNS Server (Primary)
DNS Server (Secondary)
User Name
Password
Channel
Authentication
DNS Relay
DNS Server (Primary)
DNS Server (Secondary)
[not applicable for RFC 2225 (RFC 1577)]
SNMP tab from