Configuring For Rfc 2516 - Digicom Michelangelo LAN Manual
Router commander
Hide thumbs
Also See for Michelangelo LAN:
- User manual (41 pages) ,
- Quick manual (2 pages) ,
- User manual (21 pages)
Table of Contents
Advertisement
3 . 1 . 4
Configuring for RFC 2516
i)
Select
Line Configuration
ii)
In the
PVC
section, enter the
iii)
In the
IP Address
section, enter all the required IP addresses assigned to you by your
ISP / System Administrator.
iv)
Select the
NAT
option as determined by your System Administrator. If required, click
Inbound
and fill in the data. (See
v)
Select the
Framing Mode
vi)
Select the
PPP Authorization
vii)
Enter your
User Name
viii) Click
Apply
for changes to take effect. Upon configuration successful, you will see a
dialog box,
'Configuration
ix)
Click
Close
to save the configurations and exit.
To change the LAN IP address / LAN Subnet Mask at the
/
LAN Subnet Mask
tab. In the
Protocol
VPI
and
VCI
values assigned by your ISP.
section 3.1.1a - NAT
option as determined by your ISP.
as determined by your ISP. Default is Auto.
and
Password
as given by your ISP.
Successful' prompted. Click OK.
field, read the Note on page 15.
Software Manual
field, click
RFC
2516.
Inbound)
LAN IP Configuration
2 3
Advertisement
Table of Contents
