Digicom Michelangelo LAN Manual page 31

•
End
DHCP Options
•
Gateway IP
•
Lease Live
•
DNS Server
The main purpose for DNS Server is to map host names into Internet addresses
(so call IP address), or vice versa.
If the first DNS server cannot process the translation request, it queries an
upper DNS server, and another one, and so on, until the correct IP address
is returned or no corresponding address for the request can be found.
•
Enable DNS Relay
•
DNS Server (Primary)
•
DNS Server (Secondary)
ii) Click Remove DHCP
successful removal, you will see a dialog box,
Click OK.
iii) Click Apply for changes to take effect. Upon configuration successful, you will see a
dialog box, 'Configuration
iv) Click Close to save the configurations and exit.
You need to proceed with
Refers to the last IP address that router will assign to a PC
requesting for it.
The IP address of a machine (other router or server) that
will resolve any unknown destination IP address requested
by Clients.
To specify the number of days how long a DHCP client
(your PCs) can use an assigned IP address before it must
renew its configuration with the DHCP server (router).
Enable this option so that DNS relay will be
informed which DNS Server to contact.
You will only be allowed to enter the IP
address of the Primary DNS Server.
The first DNS Server to consult.
The backup DNS Server if the primary one
fails.
to remove the DHCP server from your router network. Upon
'DHCP Removed
Successful' prompted. Click OK.
section 3.3.1 to configure your Ethernet card for DHCP.
Software Manual
Successfully' prompted.
3 1