Honda EG3600CX Manual page 210

82Z30000.book 17 ページ ２０１０年６月２５日 金曜日 午後５時５０分
GOVERNOR ARM SHAFT OIL SEAL (except
EG3600CX/EG4000CX)
Remove the oil seal from the cylinder barrel.
Apply grease to the lip of a new oil seal (1).
Drive the oil seal in the position as shown using the
special tools.
TOOLS:
Pilot, 14 mm (2)
Driver (3)
CRANKSHAFT OIL SEAL
Remove the oil seal from the cylinder barrel.
Apply grease to the lip of a new oil seal (1).
Drive the oil seal in the position as shown using the
special tools.
EG3600CX/EG4000CX:
Except EG3600CX/EG4000CX:
07746-0041200
07749-0010000
TOOLS:
Attachment, 45 × 50 mm (2)
Driver (3)
TOOLS:
Attachment, 52 × 55 mm (2)
Driver (3)
(3)
(2)
0 – 0.5 mm
(0 – 0.02 in)
OIL SEAL RIP
(3)
(2)
07946-6920100
07749-0010000
2 mm (0.08 in)
07746-0010400
OIL SEAL RIP
07749-0010000
CYLINDER BLOCK
(1)
(1)
14-17