Honda EG3600CX Manual page 109

82Z30000.book 2 ページ ２０１０年６月２５日 金曜日 午後５時５０分
GOVERNOR SYSTEM
GOVERNOR ARM REMOVAL/INSTALLATION
GOVERNOR SYSTEM
Remove the fuel tank (page 5-4).
GOVERNOR ROD/THROTTLE RETURN SPRING
REMOVAL/INSTALLATION:
Turn the throttle arm to a point where the groove of
throttle arm lines up with the governor rod, and
then lift the governor rod out of the hole of throttle
arm and unhook the throttle return spring.
Installation is in the reverse order of removal.
GOVERNOR ROD
THROTTLE
RETURN
SPRING
THROTTLE ARM
BOLT (CT) (6 x 12 mm) (5)
6-2
GOVERNOR SPRING
MH, RH, KH, RHH, UH, RGH type:
SH, SKH, LDH, LTH type:
CONTROL BASE
BOLT (CT) (6 x 12 mm) (2)
NUT (6 mm)
GOVERNOR
ARM BOLT
GOVERNOR ARM