Honda EG3600CX Manual page 138

82Z30000.book 5 ページ ２０１０年６月２５日 金曜日 午後５時５０分
IGNITION COIL INSTALLATION/
ADJUSTMENT
Attach the ignition coil (1) and loosely tighten the two
bolts (2).
Insert the thickness gauge (3) of proper thickness
between the ignition coil and flywheel.
IGNITION COIL AIR GAP:
0.2 – 0.6 mm (0.01 – 0.02 in)
Adjust the ignition coil air gap equally on both sides.
Push the ignition coil firmly against the flywheel and
tighten the two bolts securely.
Remove the thickness gauge.
Connect the engine wire harness to the ignition coil.
Route the engine wire harness and high-tension cord
properly (page 2-13).
OIL ALERT UNIT REMOVAL/
INSTALLATION
Remove the two bolts (1).
Unhook the harness band boss (2) from the harness
clip base (3).
Unhook the harness band (4).
Disconnect the wire connectors (1).
Remove the bolt (2) and oil alert unit (3).
Installation is in the reverse order of removal.
IGNITION SYSTEM
(2)
(1)
(3)
0.2 – 0.6 mm
(0.01 – 0.02 in)
CX type shown:
(2)
(4)
(3)
(1)
(3)
(1)
(2)
8-5