Auxiliary Control Unit
Adding a Standalone Auxiliary Control Unit
The following illustrations and steps describe how to attach the auxiliary control unit to your CTS-3000.
Turn off the power to the side PDUs and unplug the power cables for the lighting assembly.
Step 1
Figure 3-1
PDU Location and Lighting Assembly Cable Routing
Power
Your installation might differ from this diagram. If your installation has the lighting connected to a
Note
central PDU located on the rear of the center display structure, turn off that PDU.
Cisco TelePresence System
3-2
Chapter 3
Options for the Cisco TelePresence System 3000
OL-16441-01