Cisco TelePresence System 1000 Hardware Options & Upgrade Manual page 44
Hide thumbs
Also See for TelePresence System 1000:
- Hardware installation manual (96 pages) ,
- Manual (20 pages) ,
- Hardware upgrade manual (166 pages)
Table of Contents
Advertisement
Cisco TelePresence Presentation Codec
Step 5
Click Login.
Locate the Phone pane in the upper left-hand corner of the administrator page and select
Step 6
Troubleshooting > System Reset. the Restart Cisco TelePresence System button appears at the top of
the window.
Step 7
Click the Restart Cisco TelePresence System button to start the reset.
Six boxes appear on the display screens.
Step 8
After the first box changes to a check mark, turn the power switches for the two left PDUs and single
right PDU to the Off position.
If there is an additional PDU that is mounted on the rear of the center display structure, power off that
Note
PDU also.
Make sure all system power is turned off before beginning this disassembly.
Caution
Figure 3-4
PDU Location
Power
Cisco TelePresence System
3-6
Chapter 3
Options for the Cisco TelePresence System 3000
OL-16441-01
Advertisement
Table of Contents
