Cisco TelePresence System 1000 Hardware Options & Upgrade Manual page 75

Chapter 5 Upgrading a Cisco TelePresence System 3000 to a Cisco TelePresence System 3200
Step 9 Attach the brackets to the new primary codec.
Insert the new codec into the display stand from the rear of the display assembly and secure it with the
Step 10
screws.
Re-attach the cables for the primary codec.
Step 11
You connect the cables to the new primary codec the same as the existing primary codec with the
Note
exception of the left and right microphone cables. You attach those cables to the audio extension unit in
the "Attaching and Routing Cables" section on page
OL-16441-01
4
6
5
5-63.
Replacing the New Primary Codec
1
Cisco TelePresence System
5-5