Cisco TelePresence System 1000 Hardware Options & Upgrade Manual page 96

Building the Second Row Table Assembly
Step 12 Assemble the I/O modules for the inner molded foam bumpers.
Figure 5-17
Note The Ethernet cables are of different lengths. Attach the Ethernet cables to the I/O modules as follows:
• Use the 12M cable, 37-0965-01, for the I/O modules between sections 5 and 3
Use the 10M cables, 37-0901-01, for the I/O modules between sections 3 and 1, 1 and 2, 2 and 4,
•
and 4 and 5
The flange on the I/O module cover piece is wider on the bottom than on the top.
Note
Cisco TelePresence System
5-26
Chapter 5 Upgrading a Cisco TelePresence System 3000 to a Cisco TelePresence System 3200
Foam Bumper Assembly
50
46
44
45
47 48 49
OL-16441-01