Cisco TelePresence System 1000 Hardware Options & Upgrade Manual page 138

Attaching and Routing Cables
Figure 5-57
Note
Before plugging cables into the Codec, label each one. For example, Left Speaker, Center Speaker.
Tip
Step 6 Attach and route the power cables for the lighting assembly. Connect the lights to the auxiliary control
unit.
Figure 5-58 Cabling the Lighting Assembly and Projector Power Cables
Power
Projector
RJ45 Ethernet
Figure 5-58
Note
Cisco TelePresence System
5-68
Chapter 5 Upgrading a Cisco TelePresence System 3000 to a Cisco TelePresence System 3200
displays the rear view of the Cisco TelePresence System. Left and right are reversed.
1 2
SERIA L PO RTS
displays the rear view of the Cisco TelePresence System. Left and right are reversed.
1 2
RES ET 10/ 100 NETWORK PO RTS
Auxiliary Control Unit
Primary Codec
OL-16441-01