Set Up A Wi-Fi Profile From The Phone - Cisco 6800 Series Administration Manual

Set Up a Wi-Fi Profile from the Phone

Procedure
Step 1
Press Applications
Step 2 Select Network configuration > Wi-Fi configuration > Wi-Fi type.
Step 3
Press the navigation key to switch the Wi-Fi type to WPS.
Step 4 Press Set.
Push-button configuration and PIN configuration display under Wi-Fi type. Follow either one of the
following steps to connect to the network.
Step 5
Connect to the network using the WPS button on your access point.
a) Select Push-button configuration.
b) Press the WPS button on your access point.
The button name may vary on your access point.
c) Press Continue on your phone.
Step 6
Connect to the network using a PIN code.
a) Select PIN configuration.
An 8-digit PIN code displays on your phone screen.
b) Go to the web page of your access point and enter the PIN code.
The procedure of entering PIN code may vary on your access points. See the respective user guide of your
access point for more details.
Upon either a successful connection or a connection failure, the connection status displays on your phone
screen.
Set Up a Wi-Fi Profile from the Phone
You can add maximum of four Wi-Fi profiles. You can use this profile to connect your phone to a Wi-Fi
network.
Procedure
Step 1
Press Applications
Step 2 Select Network configuration > Wi-Fi configuration > Wi-Fi profile.
Step 3
In the Wi-Fi profile screen, move to a row in the list on which you want to set up the profile.
Step 4 Press the Select button.
You can also press Options and then select Edit.
Step 5
In the Edit profile screen, set the parameters as mentioned in the Profile Parameters table.
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
48
.
.
Phone Installation