Cisco 6800 Series Administration Manual page 306

E911 Geolocation Configuration
E911 Geolocation Configuration
E911 Geolocation Configuration
Parameter
Company UUID
Primary Request URL
Secondary Request URL
See Emergency Call Support Terminology, on page 185
phones.
User
Hold Reminder
Parameter
Hold Reminder Timer
Hold Reminder Ringtone
Call Forward
Parameter
Cfwd Setting
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
292
Description
The Universally Unique Identifier (UUID) assigned
to the customer by the emergency call services
provider.
Maximum identifier length is 128 characters. Defaults
to blank.
Encrypted HTTPS phone location request. The request
uses the phone IP addresses, MAC address, Network
Access Identifier (NAI), and chassis ID and port ID
assigned by the network switch manufacturer. The
request also includes the location server name and the
customer identifier.
The server used by the emergency call services
provider responds with an Emergency Response
Location (ERL) that has a location Uniform Resource
Identifier (URI) tied to the user phone IP address.
Defaults to blank.
Encrypted HTTPS request sent to the emergency call
services provider's backup server to obtain the user's
phone location.
Defaults to blank.
for terms that describe emergency call support for
Description
Specifies the time delay (in seconds), that a ring splash
is heard on an active call when another call was placed
on hold.
Default: 0
Specifies the volume of the timer ringtone.
Description
Select Yes to enable call forwarding.
Phone Troubleshooting