Cisco 6800 Series Administration Manual page 282

XSI Phone Service
XSI Phone Service
Parameter
XSI Host Server
XSI Authentication Type
Login User ID
Login Password
SIP Auth ID
SIP Password
Directory Enable
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
268
Description
Enter the name of the server; for example,
xsi.iop1.broadworks.net.
XSI Host Server uses http protocol by
Note
default. To enable XSI over HTTPS, you
can specify
https://
Default: Blank
Determines the XSI authentication type. Select Login
Credentials to authenticate access with XSI id and
password. Select SIP Credentials to authenticate
access with the register user ID and password of the
SIP account registered on the phone.
Default: Login Credentials
BroadSoft User ID of the phone user; for example,
johndoe@xdp.broadsoft.com.
Enter SIP Auth ID when you select Login Credentials
or SIP Credentials for XSI authentication type.
When you choose SIP Auth ID as SIP Credentials,
you must enter Login User ID. Without Login User
ID, the BroadSoft directory will not appear under the
phone Directory list.
Default: Blank
Alphanumeric password associated with the User ID.
Enter login password, when you select Login
Credentials for XSI authentication type.
Default: Blank
The registered user ID of the SIP account registered
on the phone.
Enter SIP Auth ID when you select SIP Credentials
for XSI authentication type.
The password of the SIP account registered on the
phone.
Enter SIP password when you select SIP Credentials
for XSI authentication type.
Enables BroadSoft directory for the phone user. Select
Yes to enable the directory and select No to disable
it.
Default: No
Phone Troubleshooting
in the server.