Cisco 6800 Series Administration Manual page 297

Phone Troubleshooting
Parameter
Disposition Code Enable
Trace Enable
Emergency Escalation Enable
Queue Status Notification Enable
Proxy and Registration
Parameter
Proxy
Outbound Proxy
Description
Enables the user to add a disposition code. Select Yes
to enable or No to disable.
Default: No
Enables the user to trace the last incoming call. Select
Yes to enable or No to disable.
Default: No
Enables the user to escalate a call to a supervisor in
case of emergency. Select Yes to enable or No to
disable.
Default: No
Displays the call center status and the agent status.
Select Yes to enable or No to disable.
Default: No
Description
SIP proxy server and port number set by the service
provider for all outbound requests. For example:
192.168.2.100:6060.
The port number is optional. If you don't specify a
port, the default port 5060 is used for UDP, and the
default port 5061 is used for TLS.
When you need to refer to this proxy in another
setting, for example, the speed dial line key
configuration, use the
All outbound requests are sent as the first hop. Enter
an IP address or domain name.
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
Proxy and Registration
macro variable.
$PROXY
283