Cisco 6800 Series Administration Manual page 248

SIP Timer Values (sec)
Parameter
SIP IP Preference
SIP Timer Values (sec)
Parameter
SIP T1
SIP T2
SIP T4
SIP Timer B
SIP Timer F
SIP Timer H
SIP Timer D
SIP Timer J
INVITE Expires
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
234
Description
Sets if the phone uses IPv4 or IPv6.
Default: IPv4.
Description
RFC 3261 T1 value (RTT estimate) that can range
from 0 to 64 seconds.
Default: 0.5 seconds
RFC 3261 T2 value (maximum retransmit interval for
non-INVITE requests and INVITE responses) that
can range from 0 to 64 seconds.
Default: 4 seconds
RFC 3261 T4 value (maximum duration a message
remains in the network), which can range from 0 to
64 seconds.
Default: 5 seconds.
INVITE time-out value, which can range from 0 to
64 seconds.
Default: 16 seconds.
Non-INVITE time-out value, which can range from
0 to 64 seconds.
Default: 16 seconds.
INVITE final response, time-out value, which can
from 0 to 64 seconds.
Default: 16 seconds.
ACK hang-around time, which can range from 0 to
64 seconds.
Default: 16 seconds.
Non-INVITE response hang-around time, which can
range from 0 to 64 seconds.
Default: 16 seconds.
INVITE request Expires header value. If you enter 0,
the Expires header is not included in the request.
Ranges from 0 to 2000000.
Default: 240 seconds
Phone Troubleshooting