Configure A Privacy Header - Cisco 6800 Series Administration Manual

Phone Administration
• alternative outbound proxy server
• IN-Dialog message from proxy server and non-proxy server. For example: Call Session dialog and
Before you begin
Access the phone administration web page. See
Procedure
Step 1
Select Voice > System.
Step 2 In the System Configuration section, set the Block Nonproxy SIP field as described in the
Configuration, on page
Step 3 Click Submit All Changes.

Configure a Privacy Header

A user privacy header in the SIP message sets user privacy needs from the trusted network.
You can set the user privacy header value for each line extension using the phone web page.
The privacy header options are:
• Disabled (default)
• none—The user requests that a privacy service applies no privacy functions to this SIP message.
• header—The user needs a privacy service to obscure headers which cannot be purged of identifying
• session—The user requests that a privacy service provide anonymity for the sessions.
• user—The user requests a privacy level only by intermediaries.
• id—The user requests that the system substitute an id that doesn't reveal the IP address or host name.
Before you begin
Access the phone administration web page. See
Procedure
Step 1 Select Voice > Extension.
Step 2
In the SIP Settings section, set the Privacy Header field as described in the
Step 3 Click Submit All Changes.
Subscribe dialog
222.
information.
Access the Phone Web Page, on page
Access the Phone Web Page, on page
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
Configure a Privacy Header
92.
System
92.
SIP Settings, on page 277.
187