Cisco 6800 Series Administration Manual page 295

Phone Troubleshooting
Call Feature Settings
Parameter
Blind Attn-Xfer Enable
Message Waiting
Auth Page
Default Ring
Auth Page Realm
Conference Bridge URL
Auth Page Password
Mailbox ID
Voice Mail Server
Voice Mail Subscribe Interval
Auto Ans Page On Active Call
Description
Enables the phone to perform an attended transfer
operation by ending the current call leg and
performing a blind transfer of the other call leg. If this
feature is disabled, the phone performs an attended
transfer operation by referring the other call leg to the
current call leg while maintaining both call legs. To
use this feature, select Yes. Otherwise, select No.
Default: No
Indicates whether the Message Waiting Indicator on
the phone is lit. This parameter toggles a message
from the SIP proxy to indicate if a message is waiting.
Specifies whether to authenticate the invite before
auto answering a page.
Default: No
Type of ring heard. Choose from No Ring or 1 through
10.
Ring options are Sunlight, Chirp 1, Chirp 2, Delight,
Evolve, Mellow, Mischief, Reflections, Ringer,
Ascent, Are you there, and Chime.
Identifies the Realm part of the Auth that is accepted
when the Auth Page parameter is set to Yes. This
parameter accepts alphanumeric characters.
URL used to join a conference call, generally in the
form of the word conference or user@IPaddress:port.
Identifies the password used when the Auth Page
parameter is set to Yes. This parameter accepts
alphanumeric characters.
Identifies the voice mailbox number/ID for the phone.
Identifies the SpecVM server for the phone, generally
the IP address, and port number of the VM server.
The expiration time, in seconds, of a subscription to
a voice mail server.
Determines the behavior of the phone when a page
call arrives.
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
Call Feature Settings
281