Enable Broadworks Anywhere; Sync The Block Caller Id Feature With The Phone And The Broadwords Xsi Server - Cisco 6800 Series Administration Manual

Phone Administration

Enable BroadWorks Anywhere

You can configure a phone to allow a call to seamlessly be moved from one desk phone(location) to another
mobile phone or desk phone(location).
When you enable this feature, the Anywhere menu is added into the phone screen. The user can use this menu
to add multiple phones as locations to the extension. When there is an incoming call in that extension, all the
added phones will ring and the user can answer the incoming call from any location. The locations list also
gets saved to the BroadWorks XSI server.
Before you begin
Access the phone administration web page. See
Procedure
Step 1
Select Voice > Ext(n).
Step 2 In the XSI Line Service section, set the XSI Host Server, XSI Authentication Type, Login User ID, Login
Password, and Anywhere Enable field as described in the
If you select SIP Credentials for XSI Authentication Type, you need to enter subsriber Auth ID and
Password in the Subscriber Information section.
Step 3 Click Submit All Changes.
Sync the Block Caller ID Feature with the Phone and the
BroadWords XSI Server
You can sync the Block caller id status on the phone and the Line ID Blocking status on the BroadWorks
XSI server. When you enable the synchronization, the changes that the user makes in the Block caller id
settings also changes the BroadWorks server settings.
Before you begin
Access the phone administration web page. See
Procedure
Step 1
Select Voice > Ext(n).
Step 2 In the XSI Line Service section, set the Block CID Enable field as described in the
page
Step 3 Click Submit All Changes.
287.
Access the Phone Web Page, on page
XSI Line Service, on page
Access the Phone Web Page, on page
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
Enable BroadWorks Anywhere
92.
287.
92.
XSI Line Service, on
191