Cisco 6800 Series Administration Manual page 274

Vertical Service Announcement Codes
Vertical Service Announcement Codes
Parameter
Service Annc Base Number
Service Annc Extension Codes
Outbound Call Codec Selection Codes
Parameter
Prefer G711u Code
Force G711u Code
Prefer G711a Code
Force G711a Code
Prefer G722 Code
Force G722 Code
Prefer G722.2 Code
Force G722.2 Code
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
260
Description
Defaults to blank.
Defaults to blank.
Description
Makes this codec the preferred codec for the
associated call.
Defaults to *017110.
Makes this codec the only codec that can be used for
the associated call.
Defaults to *027110.
Makes this codec the preferred codec for the
associated call.
Defaults to *017111
Makes this codec the only codec that can be used for
the associated call.
Defaults to *027111.
Makes this codec the preferred codec for the
associated call.
Defaults to *01722.
Only one G.722 call at a time is allowed. If a
conference call is placed, a SIP re-invite message is
sent to switch the calls to narrowband audio.
Makes this codec the only codec that can be used for
the associated call.
Defaults to *02722.
Only one G.722 call at a time is allowed. If a
conference call is placed, a SIP re-invite message is
sent to switch the calls to narrowband audio.
Makes this codec the preferred codec for the
associated call.
Makes this codec the only codec that can be used for
the associated call.
Phone Troubleshooting