Assign A Ring Tone To An Extension With The Phone Web Page; Forward Calls In Specific Situations From Your Phone - Cisco 7811 User Manual

Assign a Ring Tone to an Extension with the Phone Web Page

Step 5
Press Back to exit.

Assign a Ring Tone to an Extension with the Phone Web Page

Procedure
Step 1
On the phone web page, select User Login > Voice > Ext(n), where (n) is the number of an extension.
Step 2 Under Call Feature Settings, use the Default Ring (n) drop-down list box to specify one of the following:
• No Ring
• 1 through 9—Choose one of the available ring tones.
Step 3
Click Submit All Changes.

Forward Calls in Specific Situations from Your Phone

You can set up your phone so that calls are forwarded during specific situations, such as when your phone is
busy.
Before you begin
Call forwarding must be enabled on your phone before you can forward your calls in specific situations.
Procedure
Step 1
Press Applications
Step 2 Select User Preferences > Call Preferences.
Step 3 Select On to enable call forwarding.
Step 4
Enter a phone number for each of the call forwarding services that you want to enable:
• Forward all number—Forwards all incoming calls to a target phone number.
• Forward busy number—Forwards all incoming calls to a target phone number when the primary line
• Fwd no answer number—Forwards an incoming call that is not answered.
• Fwd no answer delay—Assigns a response delay time.
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
60
.
is active.
If your administrator disables the feature key synchronization (FKS) on your phone, you can enter the
value as number of seconds after which call needs to be forwarded.
If your administrator enables feature key synchronization (FKS) on your phone, you can enter the value
as number of rings after which call needs to be forwarded.
Settings