Document Organization - Cisco ONS 15454 Reference Manual

Document Organization

Table 1
Title
Chapter 1, "Shelf and Backplane Hardware"
Chapter 2, "Common Control Cards"
Chapter 3, "Electrical Cards"
Chapter 4, "Optical Cards"
Chapter 5, "Ethernet Cards"
Chapter 6, "Storage Access Networking Cards"
Chapter 7, "Card Protection"
Chapter 8, "Cisco Transport Controller
Operation"
Chapter 9, "Security"
Chapter 10, "Timing"
Chapter 11, "Circuits and Tunnels"
Chapter 12, "SONET Topologies and Upgrades"
Cisco ONS 15454 Reference Manual, R7.0.1
xlii
Cisco ONS 15454 Reference Manual Chapters
Summary
Includes descriptions of the rack, backplane,
backplane pins, ferrites, power and ground,
fan-tray assembly, air filter, card slots, cables,
cable connectors, and cable routing.
Includes descriptions of the TCC2, TCC2P, XCVT,
XC-VXC-10G, XC10G, and AIC-I cards.
Includes descriptions of EC-1, DS-1, DS-3, and
DS3E cards, card temperature ranges, and
compatibility.
Includes descriptions of the OC-3, OC-12, OC-48,
OC-192, and MRC-12 cards, as well as card
temperature ranges and card compatibility.
Includes descriptions of the E-Series, G-Series,
and ML-Series Ethernet cards and Gigabit
Interface Converters (GBICs).
Includes descriptions of the FC_MR-4 Fiber
Channel/Fiber Connectivity (FICON) card, card
temperature ranges, compatibility, and
applications.
Includes electrical and optical card protection
methods.
Includes information about CTC installation, the
CTC window, computer requirements, software
versions, and database reset and revert.
Includes user set up information, security
parameters and privileges, RADIUS
authentication, and audit trail information.
Includes node and network timing information.
Includes STS and VT, bidirectional and
unidirectional, revertive and nonrevertive,
electrical and optical, multiple and path trace
circuit information, as well as DCC tunnels.
Includes the SONET configurations used by the
ONS 15454; includes bidirectional line switch
rings (BLSRs), path protection configurations,
linear add/drop multiplexers (ADMs), subtending
rings, and optical bus configurations, as well as
information about upgrading optical speeds within
any configuration.
About this Manual
OL-9217-01