Table of Contents
Advertisement
80
Move the cursor with the arrow keys or in order to change the val-
◼
ue to "locked".
◼
After making the change, press the ENTER button to confirm the input.
The input value can be deleted by pressing the ESC button.
7.2.3 Display remaining battery power
The calculation of the remaining battery power depends on the
consumed capacity (which is measured) and on the
anticipated future consumption under typical conditions. These
two values lead to the theoretical remaining battery power,
which is displayed under Bat.R. For applications with atypical
high power consumption, this procedure may cause the actual
remaining battery power to drop quicker than the displayed
predicted remaining battery power.
The remaining battery power Bat.R will automatically be
recalculated after entering a new battery capacity Bat.C (see
above). The Bat.R value cannot be edited.
◼
Move the cursor to the "Admin" register and to the "Bat.R" value (re-
maining battery power) via the following path:
Admin Batteries Bat.R
After entering the new battery capacity, a value of
at least 96 months will be displayed in standard
measurement conditions (see chapter 3.2.1) for "Bat.R".
7.3 Changing and testing modem batteries
7.3.1 Changing and connecting modem batteries
DANGER!
Using the incorrect batteries may present a risk of
explosion!
Only use batteries prescribed by Elster in accordance with
Chapter 9.1.2.
Maintenance
Advertisement
Table of Contents
