Electrical Assemblies; Internal Battery Power Options - Honeywell CNI4 Operating And Installation Manual

5 Electrical Assemblies

5 Electrical Assemblies

5.1 Internal Battery Power Options

Shown below is the CNI4 device with the Pulse Accumulator and Cloud Link 4G Modem battery packs
installed and wired.
Component
Pulse Accumulator
Cloud Link 4G Modem
To connect the battery pack to the Pulse Accumulator
1. Insert the Pulse Accumulator battery pack into the battery holder provided on the enclosure door.
2. Connect the Pulse Accumulator battery pack to the Y cable.
3. Wrap the extra wire using a cable tie.
Figure 5-1: Lithium Battery Pack Mounting
Battery pack
Dual-cell Lithium power pack
Single Lithium D-Cell
Ordering Part Number
40-6048
51203165-100
Honeywell
| 14