Connections - Honeywell DL230 Operating Instructions Manual

Construction and Function
Simple monitoring functions are possible with this. Events can be stored in
an archive, emitted as a status signal or transmitted to a central location via
SMS if required.
Two digital outputs can be used to transfer consumption information or to
signal warnings and alarms.
Energy supply is with lithium batteries. In addition, the device can also be
equipped with a 230VAC power supply unit.
For data communication purposes an integrated modem is available, which
supports the GSM, GPRS and UMTS (2G and 3G) radio standards. Alter-
natively, communication modules can be used for Ethernet communication
or for communication via RS232/RS485 interface.
Use of the DL230 is via 7 keys and an alphanumeric display on the front
panel.

4.4 Connections

The DL230 memory can be connected to:
–
a maximum of three batteries (2x device batteries and 1x modem bat-
tery or 1x device battery and 2x modem batteries)
–
Optional 230V connection to an internal power supply unit
The following can be used to monitor and record data and to transmit data
and program functions:
–
4 counting and signal inputs DE1, DE2, DE3, DE4
–
2 pulse and signal outputs DA1, DA2
–
Integrated GSM/GPRS modem
–
Optical data interface
Further details on the connection possibilities for the DL230
and the available equipment versions can be found in the
"Technical Data" chapter and in chapter "Assembly, Con-
nection and Putting into Operation".
33